If your hoverboard won’t go forward or backward this article will help you identify and solve the problem your hoverboard might have . . .
Hoverboard Won’t Go Backwards – – How To Fix It
If your hoverboard doesn’t move backward when you try taking it backward then the problem could be that your hoverboard needs to be calibrated. Calibrating a hoverboard is just resetting it. If you want to see how to calibrate your hoverboard, go to the link below.
How To Calibrate A Hoverboard [Guide, Problems & Solutions] (zimhoverboard.com)
Hoverboard Won’t Go Forward – – How To Fix It
If your hoverboard doesn’t move forward when you try moving it, the problem could be that the hoverboard needs to be calibrated. To calibrate your hoverboard, follow these quick and easy steps. . .
Step 1. Put your hoverboard off before you start the calibration process.
Step 2. If you put your hoverboard off from the remote you will still have to use the power button on the hoverboard to make sure it is off.
Step 3. Keep the hoverboard on a flat and level surface and make sure it is well balanced.
Step 4. Make sure both sides of the hoverboard are well aligned.
Step 5. Press and hold the power button for about thirty seconds until you hear a beeping noise and the hoverboard lights start flashing.
Step 6. When you see the flashing lights, leave the hoverboard alone for about a minute until the flashing lights stop.
Step 7. Make sure you don’t move the hoverboard when it is still in the calibration process.
Step 8. When the flashing lights stop, press the power button again to put the hoverboard off and to lock the calibration process.
Step 9. Put the hoverboard back on and check if it is working like it is supposed to and then you can continue riding the hoverboard.
Hoverboard Won’t Go Fast – – How To Fix It
If your hoverboard doesn’t go fast when you try going faster the problem could be that the hoverboard is not in the right mode. To change the mode of the hoverboard, follow these steps
Step 1. Stand the hoverboard on one of its wheels.
Step 2. Press the power button. When the light turns green it is in beginner mode.
Step 3. Press the power button again. When the light turns red it is in advanced mode.
Step 4. Press the power button for the last time. When the light turns red it is in intermediate mode.
Step 5. Choose any mode that you want. The speed of the hoverboard should change now.
How To Fix A Hoverboard That Turns On But Doesn’t Move
If your hoverboard comes on but doesn’t move you might have to replace your hoverboard’s gyroscopes. If you want to see how to replace your hoverboard’s gyroscopes, go to the link below.
Hoverboard Not Working [How To Fix] (zimhoverboard.com)