Hoverboard Wheel [How To, Problems & Solutions]

Do you have any problem with your hoverboard wheel? Here we will show you what the problem is and how to fix it.

Hoverboard Wheel Stuck – – How to fix

If your hoverboard wheel is stuck follow these steps to fix it . . .

Step 1. Turn the hoverboard off.

Step 2. Remove the back cover.

Step 3. Carefully unplug all the wires

Step 4. Unscrew all the hoverboard screws.

Step 5. Pull out the wheel and put it back in its original position.

Step 6. Reconnect all the wires and put the back cover back in its place.

Step 7. Restart your hoverboard and you are done.

How To Clean A Hoverboard Wheel

Here’s how to clean your hoverboard wheels . . .

Step 1. Get a scrubbing brush and a bucket of water.

Step 2. Carefully scrub the wheels until they are clean.

Step 3. Leave the hoverboard to dry then you can use it.

How To Take A Hoverboard Wheel Out

Follow these simple steps to take out your hoverboard wheel . . .

Step 1. Use an Allen wrench to take out the bolts that are holding the hoverboard wheel in place.

Step 2. Carefully take out the wheel.

Step 3. Disconnect any wires that are connected to the wheel of your hoverboard.

How To Unlock Your Hoverboard Wheel

If you try to unlock your hoverboard wheels and it doesn’t work try pressing the button to unlock the wheels of the hoverboard more than once and then check if the wheels have been unlocked.

How To Open A Hoverboard Wheel

Here’s how to open your hoverboard wheel. . .

Step 1. Use an Allen wrench to remove the bolts that are holding the hoverboard wheel in place.

Step 2. Carefully remove the hoverboard wheel.

Step 3. Disconnect the wires that are connected to the wheel of the hoverboard.

Step 4. Use a screwdriver to remove the screws on the hoverboard wheel.

Step 5. Open up the hoverboard wheel.

Hoverboard Front Wheel Wobbles – – How to fix

Here’s how to fix your hoverboard wheel if it vibrates as you get off the hoverboard . . .

Step 1. Put your hoverboard off and keep it on a surface where you can work easily.

Step 2. Use a Phillips screwdriver to remove all the screws on the side of the hoverboard that vibrates( Some screws are different from the others so don’t mix them up.

Step 3. Remove the back cover but pull it off gently so you don’t cut the wires that are on the hoverboard cover.

Step 4. Use your Phillips screwdriver to remove the four screws over a black box you will see there.

Step 5. When you are done removing the screws carefully remove the black box.

Step 6. When you remove the black box you will see two black rubber bumpers use a pair of scissors to cut a very small bit out of them.

Step 7. When you are done cutting off those parts, put the black box back over small bumpers and put the screws back in.

Step 8. Put the hoverboard cover back on and put the screws back in their places.

Step 9. Hold the on button for ten seconds and then when you see the hoverboard lights flashing you can release the power button.

Step 10. Put the hoverboard off and then put it back on.

Step 11. Check if the hoverboard works properly.

Hoverboard Wheel Grinding – – How to fix

If your hoverboard wheel is grinding you will have to replace the wheel as soon as possible because leaving it will wear the wheel down.
To replace the hoverboard wheel follow these quick and easy steps . . .

Step 1. Use an Allen wrench to take out the bolts that are holding the hoverboard wheel in place.

Step 2. Carefully take out the wheel.

Step 3. Disconnect any wires that are connected to the wheel of your hoverboard.

Step 4. Put a new hoverboard wheel inside.

Step 5. Reconnect the wires that you disconnected before to your new hoverboard wheel.

Step 6. Use your Allen wrench to put the old bolts back in place.

Step 7. Check if the hoverboard wheel has stopped grinding.

My Hoverboard Wheel Is Rubbing – – Why and How to fix

If your hoverboard wheel is rubbing the plastic of the hoverboard the problem is that the hoverboard’s motor is being pushed outward or inward too much. There are two ways to fix the hoverboard’s wheel. Follow these quick and easy steps to fix the wheel of your hoverboard . . .

This is the first way to fix your hoverboard wheel . . .

Step 1. Use a Phillips screwdriver to unscrew the side of your hoverboard that has a bad wheel(some screws are different from the others so don’t mix them up.)

Step 2. Use an Allen wrench to remove the bolts holding the hoverboard wheel in place.

Step 3. Carefully remove the hoverboard wheel because there are wires connected to the wheel.

Step 4. Put the hoverboard wheel back in its place and the bolts back in.

Step 5. Put the hoverboard’s cover back on and use your Phillips screwdriver to put the screws back in their places.

Step 6. Check if your hoverboard’s wheel works well.

If the hoverboard wheel is still rubbing try the second way to fix the hoverboard wheel . . .

Step 1. Remove the top cover of the bad hoverboard wheel by using a screwdriver to remove the four screws you will see there.

Step 2. Get some sandpaper and use it on the bottom of the top cover and also use it on the hoverboard wheel.

Step 3. Check if your hoverboard wheel has stopped rubbing.

Another way to stop the hoverboard wheel from rubbing is to ride the hoverboard around for a while so that the hoverboard wheel will rub itself down just like the sandpaper would have done.

How To Fix A Hoverboard Spinning – – Solution

Here’s how to fix your hoverboard’s spinning problem . . .

Step 1. Use a Phillips screwdriver to unscrew the side of your hoverboard that has a faulty wheel( some screws will be different from the others so make sure you don’t mix them up.

Step 2. Carefully remove the hoverboard’s cover because there are wires connected to the hoverboard.

Step 3. If you want to disconnect the wires that are connected to the cover of the hoverboard, find the end of the wires and then pinch the small white thing you will see there and then carefully pull the wires out.

Step 4. Inside your hoverboard you will see a black box there with four screws in it. Use your Phillips screwdriver to remove the screws and then set them aside.

Step 5. On the black box you will see some wires connected to it. You can easily remove it if you want to.

Step 6. If the wires that were connected to the black box are under the battery cage you can easily use your screwdriver to remove the four screws there and then slide the wires out.

Step 7. Remove the black box in the hoverboard and then set it aside.

Step 8. Under the small black box you will see two black rubber bumpers with small rubber tips. Get a pair of scissors and then use it to cut off a very small bit of the little rubber tips.

Step 9. Put the black box back over the rubber bumpers and then screw it back.

Step 10. If you unscrewed the battery cage before take the four screws that you removed before and then put them back in their places

Step 11. Reconnect the wires that you disconnected before.

Step 12. Put the hoverboard cover back on and put the screws back in their places.

Step 13. Check if your hoverboard works properly now.

How Spin On Your Hoverboard

If you want to spin to the left on a hoverboard Push your right toes down and push your left ankle down. If you want to spin to the right, repeat the process the other way around.

How To Ride A One Wheel XR

To ride a one wheeled hoverboard follow these simple steps . . .

Step 1. Lean on something or someone so you can climb on the hoverboard easily.

Step 2. Lean forward on the hoverboard to accelerate.

Step 3. To slow down on the hoverboard lean backwards.

Step 4. Lean to the right or to the left to turn the hoverboard.

Something Stuck In Hoverboard Wheel – – How to remove

If something like thread or hair is stuck in your hoverboard wheels and it has stopped working, get something like a hairbrush and then carefully put it inside the hoverboard wheel and bring out the thing that was stuck in the wheel.

How To Get A Free Hoverboard

To get a free hoverboard follow these steps . . .

Step 1. Turn your phone or laptop on.

Step 2. Open google then go to Free stuff 4 everyone.

Step 3. You will see a form at the bottom of the page, fill it and put in your shipping address.

Step 4. Choose the free item that you want.

Step 5. The final thing you will have to do is to verify yourself.

Step 6. You will have to download one of the apps that you will see there and then use it for about a minute.

Step 7. Go back to the site and you will see that the order is ready for shipping.

Step 8. Wait for 2 – 3 weeks for the the hoverboard to arrive

How To Make A Hoverboard Go Faster

To make your hoverboard faster, follow these simple steps . . .

Step 1. Turn your hoverboard on.

Step 2. Wait until the hoverboard beeps for the last time and then press the power button again.

Step 3. Release the power button

Step 4. Check if the hoverboard is faster.

How To Buy A Hoverboard

To buy a hoverboard that won’t burn up or explode, go to amazon and look for the hoverboard that has the best quality. The good quality hoverboards are most likely to be the more expensive ones. But if you want to buy a cheap hoverboard you are increasing the risk of the hoverboard burning up.

How To Lock Hoverboard

To lock your hoverboard first get the hoverboard and secure it tightly on a solid object. Next, loop the hoverboard lock around the middle of the hoverboard, connect the two heads together and then you are done.

How To Fix A Hoverboard That Turns On But Doesn’t Move

If your hoverboard light comes on but one the wheels doesn’t move, it might mean that the gyroscope on that side of the hoverboard is bad. To solve this problem, you will have to replace the bad gyroscope. To do this follow these simple steps . . .

Step 1. Place your hoverboard on a sturdy surface.

Step 2. Use a Phillips screwdriver to unscrew the side of the hoverboard without the charging port.

Step 3. On the side that you need to replace the gyroscopes, unclip all the clips that are on the gyroscope.

Step 4. Unscrew the screws on the gyroscope and then take it out.

Step 5. Put the new gyroscopes inside and plug the clips back on the new gyroscope.

Step 6. Reassemble the hoverboard and put the screws back in their places.

Step 7. Check if your hoverboard works properly.

Hoverboard Wheel – – FAQs

Hoverboard Wheel Making Noise – – Why?

If your hoverboard wheel is making noise while you are riding it, Don’t worry because it is not a big problem. The cause of the noise might be that the plastic shell of the hoverboard is rubbing on the wheel.

Hoverboard Wheel Not Smooth – – Why?

If your hoverboard wheel isn’t running smoothly like it’s supposed to, the reason for that is most likely that one of the wires has come loose. Open the hoverboard with your Phillips screwdriver and check if the hoverboard wires are still in good condition.

Hoverboard Wheel Not Turning – – Why?

If your hoverboard wheel doesn’t turn when you put it on, check if the hoverboard is fully charged. If you plug your charger into your hoverboard and the hoverboard is fully charged then there might be a problem with the internal circuits of the hoverboard. The only way to solve this problem is to replace the circuits.

Hoverboard Wheel Is Hot – – Why?

If your hoverboard wheels get hot this can be the cause of overriding. Leave the hoverboard to cool before you ride it again. Another reason for overheating is that the main board sends too much current to the hoverboards giving it a lot of speed and making it overheat.

Can You Change The Wheels On A Hoverboard?

The answer to that question is yes you can change the wheels of a hoverboard if the hoverboard wheel motors have spoiled. If the hoverboard wheel motors you will have a red light on the hoverboard flashing four or five times. Also if the light on the hoverboard flashes four times this means that the wheel of the side opposite the battery has spoiled and is in need of replacement.

Hoverboard One Wheel Doesn’t Work – – Why?

The reason one of your hoverboard wheels doesn’t work is because of a bad gyroscope. The only way to solve this problem is to replace the gyroscope.

Hoverboard Wheel Locked – – Why?

If your hoverboard wheel is locked this is not something you should be worried about because when the hoverboard was made the locked wheel was put there for safety.

Hoverboard Wheel Not Moving – – Why?

If the lights of your hoverboard are but the wheels are not moving, this can be the result of faulty gyroscopes. What happens sometimes is that when a gyroscope spoils the second one spoils with it.